Leading 10 usual forklift accidents ， forklift operation should pay attention to these matters ！.
Leading 10 usual forklift accidents ， forklift operation should pay attention to these matters ！.
Blog Article
Do not take too lightly the forklift at the office. If the operation is not good, there will certainly be serious crashes in minutes, and there are many crashes including forklifts.
Instance 1: The forklift freight obstructed the motorist's sight, and the person ahead could not be located, leading to a moving crash.
Instance 2: In order to keep the balance of the forklift when raising heavy goods, the employees used their body weight as the counterweight, which almost created casualties.
Situation 3: The width of the forklift cargo surpasses the permitted width of the route and holds on the roadside rack, which nearly triggers an accident.
Case 4: Forklift is speeding and surrender during a turn.
Case 5: The forklift driver did not notice the pedestrian, and the pedestrian did not observe the forklift.
Instance 6: The forklift raises the employees illegally, the forklift motorist does not put on the safety belt, the forklift lifter drops and the chauffeur is squashed when the forklift surrender.
Case 7: The forklift driver did not wear a seat belt and fell from the vehicle when it rolled over and was squashed.
Forklift procedure need to pay attention to these issues ：.
Beginning.
1. Before beginning, observe the environments, and after confirming that there are no obstacles that hinder the safety and security of driving, beep the horn first and after that begin.
2. For lorries with hydraulic ( atmospheric pressure) brakes, the brake hydraulic stress (air pressure) scale should be secure before beginning.
3. When the forklift begins with a lots, the motorist must first verify that the load is steady and reputable.
4. The beginning needs to be slow and stable.
Driving.
1. When driving, the elevation in between the bottom end of the fork and the ground ought to be maintained 300mm-400mm, and the pole needs to be slanted backward. .
2. Do not lift the fork too high when driving. When getting in and leaving the task site or while driving, be careful that there will certainly be no obstacles in the sky. When the load is taking a trip, the fork has to not be elevated too expensive, which will certainly affect the stability of the forklift. .
3. After dumping, the fork should be reduced to the regular driving position before driving. .
4. When transforming, if there are pedestrians or cars close by, the driving signal needs to be released initially. High-speed sharp turns are banned. High-speed sharp turns will cause the vehicle to shed lateral security and topple. .
5. When the forklift is downhill, it is purely forbidden to turn off the flame and slide, and it is prohibited to brake instantly while driving with lots unless there are special situations.
6. When the forklift is running, it needs to comply with the website traffic rules in the factory and have to maintain a certain safety distance from the car in front. .
7. When the forklift is running, the tons must be in the lowest placement that does not impede the driving, and the gantry should be appropriately tilted back. The load will not be increased other than when stacking or packing. .
8. The height of the tons should not block the chauffeur's sight. In special situations, when the item affects the forward vision, drive at a low rate when turning around.
9. It is restricted to switch on the ramp, nor to drive across the ramp. .
10. The safe driving rate of the forklift in the manufacturing facility location is 5 km/h, and it needs to drive safely at a low rate when getting in the production workshop area. .
11. When the forklift is raised, raised or driven, it is prohibited for personnel to stand on the fork to hold things and play a stabilizing function. .
12. If problems are found, they will be repaired and reported in a prompt way, and they will never ever run with diseases or conceal them.
filling and discharging.
1. When fork-loading products, the distance in between the two forks need to be readjusted as needed to make the lots of both forks balanced and not manipulated, and one side of the product should protest the rack. .
2. It is restricted to deal with a single fork or make use of a fork top or pull. In unique scenarios, safety indication should be set up to remind bordering pedestrians. .
3. In the process of packing and unloading products, the forklift must be stopped with the brake. .
4. The speed of the automobile ought to be slow-moving and stable. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled things and hurt individuals. .
5. When using a fork to fork the goods, the fork must be as deep as possible under the tons, and it needs to be noted that the fork pointer should not touch various other goods or items. The lots should be supported with marginal back tilt of the gantry to Stand-on Electric Pallet Stacker ensure that the lots does not slide backwards. The pole can be slanted forward somewhat when the lots is lowered to enable very easy placement of the tons and removal of the forks. .
6. It is restricted to fork goods at high speed and ram tough objects with the fork head. .
7. When the forklift is working, it is prohibited for individuals to stand around the fork, so as to prevent the collapse of the goods and harm individuals. .
8. Straining is restricted, and it is forbidden to make use of forks to raise personnel to engage in high-altitude operations to prevent high-altitude dropping crashes. .
9. It is not permitted to make use Stand-on Electric Pallet Stacker of the brake inertia to slip, put, round or roll objects. .
10. It is not enabled to utilize forks to choose, transform pallet dump.
Leaving .
1. It is restricted to leave the forklift when the things on the fork impend. Prior to leaving the forklift, you must unload the goods or lower the fork frame.
2. Pull the parking brake deal with to dead or depress the parking brake switch.
3. The engine is turned off and the power is cut off. (Except for special circumstances, such as the chauffeur does not leave the car's line of sight and does not exceed 1 minute).
4. Remove the key. .
Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the look must be inspected, and fuel, lubing oil and air conditioning water need to be included.
2. Examine the safety performance of starting, running and braking.
3. Check whether the lights and horn signals are total and reliable.
4. Throughout the procedure of the forklift, inspect whether the pressure and temperature are regular.
5. After the forklift is running, the external leak should also be checked and the seals ought to be changed in time.
Forklift Safety Operation Specifications.
1. You have to check before leaving the vehicle;.
2. When you run into someone before you throughout driving, you need to send a signal at a distance of 5 m;.
3. The driving rate in the manufacturing facility does not go beyond 5 km/h;.
4. When driving, the nadir of the freight need to be 0.3 m ~ 0.4 m above the ground;.
5. The turning ought to not be too sharp to avoid the propensity of " totally free switching";.
6. Running up and down the slope ought to be sluggish and uniform, and no activating the slope is permitted.
7. Do not drive throughout the slope. When the gradient is greater than 10%, the lorry should be driven backwards when declining;.
8. When the forklift employees lug the goods and move on, if they run into large or hefty products and most likely to the driver's line of sight, they should take the reversing workout
.
The "Eight Prohibitions" ought to be adhered to in the operation.
1. Solitary fork procedure is not enabled.
2. It is not permitted to lift the goods for cross country driving.
3. It is not allowed to pick up the goods by turning over the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and other dangerous chemicals with forks.
5. It is not allowed to make use of inertia force to get the goods.
6. It is not allowed to utilize stopping force to expatriation round or easy-to-roll things.
7. It is not permitted to bring individuals to work on the pallet or fork, and it is strictly forbidden to stand under the fork after the fork is raised.
8. Do not drive laterally on slopes
.
Car parking is not allowed under the following problems.
1. Contours, narrow roads, railway crossings;.
2. Areas with a longitudinal incline higher than 5%.
3. When there is an obstacle on one side of the roadway, the contrary side of the area with the same length as the barrier must be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844